All plastic materials used in the manufacture of the Backpack Boozetube portable drinks dispenser, are approved by sanitary technical regulations for materials destined to be in contact with food and drink.
Filling the Dispenser
The Backpack Boozetube may be used to serve all types of drink (beer, wine, soft drinks, juices, cocktails, etc.), carbonated or not, with the exception of undiluted spirits with a high alcohol content.
Before filling the dispenser, cool the tube by rinsing briefly with cold water.
Using the Dispenser
Take care to ensure the cap is firmly in place and the tap nut is tight.
As the Backpack Boozetube works by gravity feed, always serve the drinks below the bottom of the Backpack, usually below the waste.
With appropriate drinks, ice cubes may be used to to keep contents cool, but bearing in mind this will dilute the contents slightly.
Make sure when wearing the backpack the user does not lean too far forward as the liquid can escape through the air hole in the cap.
Adjust the shoulder straps by pulling down on the shoulder strap adjuster straps hanging at the front of the harness. Ensure the harness is snug fitting to maximise comfort.
Cleaning the Dispenser
After use, rinse thoroughly and make water flow through the tap.
Clean the inside of the tube with warm water, conventional sterilising cleaning liquid and our specially designed brush. (Optional)
Leave to dry by hanging up (preferably upside down), without the cap on, from a coat hook. This way it is less likely to get broken.
Pull back the tap leavers to fully open when storing, allowing for air flow.
Do not store liquids n the tube. (Overnight etc.)
Do not use abrasive products or solvents for any part of the cleaning process.
Maintenance of the Dispenser
In the event of breakage or wear all parts may be purchased individually as spares. Please contact Lock Smith & Barrel for details.
return to top
